Home / Products / SaharaMat® / Maintenance A liquid hungry floor mat!

DAILY:	WEEKLY:	MONTHLY:
Vacuum with a commercial upright Spot clean using appropriate chemicals. Include the floor matting as you inspect the daily performance of the overnight cleaning contractor or in-house personnel.	Check the position of the matting to be sure it is not buckled against immobile objects like doors, posts, or walls. Clean under the edge of the matting to a depth of 4' to remove accumulations of dirt and debris and prevent damage to mat edges.	Extraction clean with a commercial extraction cleaning unit. Inspect matting closely for small damage that could become a bigger problem. (Most damage that occurs to Sbemco matting can be repaired by either Sbemco personnel or a qualified sub-contractor.

	Before matting can be rolled for storage, it must be completely dry and free of large pieces of dirt and debris.
	Flip mat so the backside is up.
	Roll mat on a core of some type, either the original core the mat was shipped on, or a 4" diameter PVC pipe of the correct length. Note Core must be long enough to span width of mat.
	Roll mat tightly on core and secure with 3 straps. (Belt, bungee cord, nylon, hooking strap, etc.)
	STORE MATS LAYING FLAT, Dont stack objects on top of the matting that will cause pressure denting or tearing. YOU CAN STACK MATS ON THEMSELVES.
	To move matting in and out of the storage area, the easiest way is with (2) four-wheel dolly carts.